TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
A DIY tutorial from SheSoCraftDee shows how to assemble a three-tier bathroom organizer using two long garden hooks and three small wooden trays. The design is intended for lightweight everyday items; the source does not provide load testing or confirm that the organizer is suitable for wall mounting.
A DIY tutorial by SheSoCraftDee shows how to turn two long, S-shaped garden hooks and three small wooden trays into a tiered bathroom organizer. The project stacks everyday supplies vertically to free up counter space, though its suggested adhesive assembly is described for lightweight items rather than heavy storage.
The organizer uses the garden hooks as side supports, with a wooden tray attached at the bottom, middle and top. Hunker’s report says the creator uses Crafter’s Square wooden trays and metal garden hooks, along with jumbo craft sticks, scissors, adhesive and optional paint or stain. The trays’ raised edges help contain small items such as cotton balls, hair ties, flossers and cotton swabs.
To prepare the trays, the tutorial covers their handles with cut-to-size craft sticks, attached with hot glue. The trays can then be painted or stained and left to dry. For assembly, one hook is laid flat and the trays are spaced along it, with enough room to reach into each one. The creator applies E6000 adhesive and hot glue where the trays meet the hook, then positions the second hook along the opposite side.
Hunker says the tutorial recommends checking that the frame is square and level and using clamps while the adhesive cures. The finished organizer is stood upright on a counter and filled after curing. The report advises placing heavier items on the bottom tray and keeping the organizer’s contents light; it does not give a tested weight limit or a specific curing time.
A Vertical Fix for Counter Clutter
The idea addresses a familiar storage constraint: small bathroom essentials can crowd a counter, while putting them in a drawer can make frequently used items less accessible. A tiered arrangement uses vertical space to keep several categories of supplies visible and within reach, without requiring a built-in cabinet.
For renters or people seeking a low-cost project, the materials listed in the report are commonly sold as craft or garden supplies, and the design can be adjusted to the size of the hooks and trays. Still, it is a DIY suggestion, not a tested storage product. Adhesive strength can vary with materials, surface preparation and curing, so the reported instructions support using it for lightweight items, not heavy bottles or containers.
Popular right now
Apple AirPods Pro 3 Wireless Earbuds with Active Noise Cancellation
KitchenAid Artisan 5-Qt Tilt-Head Stand Mixer – Dried Rose (KSM150PS)
Dyson V8 Cyclone Cordless Vacuum
As an affiliate, we earn on qualifying purchases.
How the Tutorial Builds the Organizer
Hunker’s report presents the project as one response to bathroom counter clutter, rather than a product launch or a claim of independently tested performance. It credits the design to SheSoCraftDee on YouTube and describes the main structure as three trays held between two long garden hooks.
The report also suggests customization: trays may be painted, stained, stenciled or decorated with decoupage, and labels can be added to their fronts. It says the number of trays could be changed to suit hooks of different sizes. These are options described in the source, not specifications for a standard kit or a guarantee that every set of materials will fit together.
“The creator uses a combination of hot glue and E6000.”
— Hunker’s report on the SheSoCraftDee tutorial
Weight Limits and Wall Mounting
The source does not report load testing, a maximum weight, or how long the adhesive must cure under particular conditions. It also does not establish how the organizer performs in a humid bathroom over time. Readers should not treat the tutorial’s description of the adhesive as proof that the structure will safely support heavier products.
Hunker mentions wall mounting with brackets and screws or Command X-Large Strips as a possible alternative to using counter space, but gives no installation demonstration or load rating for that setup. The report does not confirm whether the hooks, trays and adhesives used in the countertop version are suitable for hanging. The project’s final dimensions and precise spacing may also vary with the materials chosen.
Assembly and Safe Use
The tutorial’s next steps are to let the painted or stained trays dry, attach them between the hooks, and leave the adhesive to cure before standing the organizer upright. Users should follow the directions on the specific adhesive they buy, check that the structure is level and stable, and begin with lightweight supplies. Keeping heavier items on the lowest tray follows the source’s guidance, but does not replace a tested weight rating.
Anyone considering wall installation would need to select mounting hardware suitable for the wall and the organizer’s total loaded weight; the source does not provide instructions or verified capacity for that version. No follow-up testing or update is included in the report, so the organizer’s long-term durability remains unreported.
Key Questions
What materials does the DIY use?
The project calls for two long metal garden hooks, three small wooden trays, jumbo craft sticks, scissors and adhesive. Paint or stain is optional; the tutorial described by Hunker uses hot glue and E6000.
What should go in the trays?
The report suggests lightweight bathroom essentials, including cotton balls, hair ties, flossers and cotton swabs. It advises keeping heavier items on the bottom tray and gives no maximum load.
Can the organizer be mounted on a wall?
Hunker mentions brackets and screws or Command X-Large Strips as possible mounting options, but does not provide installation details or confirm a safe weight capacity. The countertop tutorial should not be treated as proof that the organizer is suitable for wall mounting.
How long should the glue cure?
The report says to let the adhesive cure fully and mentions using clamps while it dries, but it does not specify a time. Follow the instructions on the particular adhesive used before loading or moving the organizer.
Source: hunker.com
