TL;DR
Get business pricing on tools and workshop supplies
- Business-only prices and quantity discounts
- Tax-exempt purchasing
- Multiple users, one account, clear invoices
TikTok creator redeux_style demonstrated a DIY Roman-style shade made by attaching a shower curtain to mini blinds, removing most of the slats and gluing the remaining ones to the fabric. The project offers a way to reuse fabric and customize a window treatment, but the source does not provide a tested cost total or performance details.
TikTok creator redeux_style showed how to make a Roman-style window shade from a shower curtain and mini blinds, reusing fabric and adapting the blinds to create the shade’s folds. The project provides a customizable alternative to buying a ready-made Roman shade, though its total cost and long-term performance are not documented in the source report.
In the video described by Hunker, the creator used an existing shower curtain for one kitchen window and said she bought a second matching curtain for another. She attached the curtain to a set of mini blinds, removing most of the slats while leaving some in place to form the ribs that create the characteristic folds. The blind’s headrail and bottom rail were also attached to the fabric.
The instructions call for measuring the window and choosing blinds that fit. The fabric should extend about 2 to 3 inches beyond the blinds on each side to allow for hems. Those edges can be sewn or finished with hem tape, fabric glue or strong craft glue. Hunker also recommends installing the blind brackets and checking that the blinds work before modifying them.
After laying the fabric and fully extended blinds face-down, the maker cuts away excess material, finishes the edges and glues the headrail to the top of the curtain. The instructions say to remove 10 to 15 slats at intervals, leaving a slat between the removed sections. The cords must remain intact for the blinds to operate. Once the adhesive has dried, the modified headrail can be hung on the brackets.
A Custom Shade From Household Materials
The method may appeal to people who want a patterned, made-to-fit window treatment without buying Roman shades off the shelf. A shower curtain can offer more fabric choices than standard blind materials, and reusing one already on hand can keep that material in circulation. These are potential benefits of the project, not measured outcomes from the source report.
Hunker notes that some Roman shades start at about $150 per window, before installation. That figure provides a price reference, but the article does not calculate the DIY project’s full cost, including any blinds, adhesive, tools or replacement fabric. A budget advantage will depend on what the maker already owns and what needs to be purchased.
The finished shade also depends on careful measuring, intact cords and secure attachment of the slats and rails. The report describes a demonstration rather than a comparative product test; it does not establish how the DIY shade performs over time or how much light it blocks.
Popular right now
Dyson V15 Detect Cordless Vacuum
Hisense 40-Inch Class QD4SR Series Hi-QLED FHD Smart Roku TV (2026 Model)
Shark AV2501AE AI Robot Vacuum with XL HEPA Self-Empty Base
As an affiliate, we earn on qualifying purchases.
How the Blind Slats Shape Folds
A Roman shade typically lifts into horizontal folds. In this DIY, the blind’s remaining slats act as supports on the back of the curtain, while the headrail and operating cords provide the lifting mechanism. Removing slats creates spaces for the fabric to gather; damaging the cords can prevent the blind from raising and lowering.
Hunker says the creator chose a black-and-white herringbone pattern. The report also suggests adapting the fabric choice to a room’s decor, but those style suggestions are examples rather than requirements. For an existing curtain, fewer edges may need hemming if its finished sides can be reused.
As an alternative to removing slats from blinds, Hunker describes using evenly spaced flat wood dowels to support the folds. Magnets attached to the dowels may hold pleats in place, but that approach requires lifting the shade by hand and is described as better suited to shorter windows.
“She removed sections of slats and glued the remaining slats to the curtain to form the ribs.”
— Hunker, describing the creator’s method
Cost and Durability Are Not Reported
The source does not state the project’s total cost, how long it took to complete, or whether the shade has been tested over extended use. Hunker gives an example of budget mini blinds priced at just under $7, but that is one product reference, not a full project estimate or a guarantee of current pricing.
It is also unclear how well the finished shade handles different curtain materials, window sizes or frequent lifting. The report does not provide details about adhesive type, weight limits, installation conditions or whether the method suits every blind design. Readers should treat the instructions as a creator’s DIY demonstration, not a tested standard for window treatments.
Measure Before Choosing Materials
Anyone considering the project can start by measuring the window and checking the dimensions of both the blind and available fabric. The fabric allowance in the report is 2 to 3 inches per side; the maker should also confirm that the chosen blind’s cords and rails remain usable before gluing anything in place.
The next steps depend on the material and intended finish: sew or adhere the hems, remove selected slats without damaging the cords, and let the adhesive dry before hanging the shade. Hunker does not list a follow-up test or further update from the creator, so any new information about durability or results remains unreported.
Key Questions
What materials does the DIY use?
The method uses mini blinds, a shower curtain or other fabric, and adhesive. Hem tape or sewing supplies can finish the fabric edges. The source says the curtain should extend 2 to 3 inches beyond the blinds on each side.
Do you remove every blind slat?
No. Hunker’s instructions say to remove 10 to 15 slats at intervals, leaving slats between the open sections to support the folds. The cords should not be cut or damaged.
Can the shade be made without sewing?
Yes. The creator’s caption describes a no-sew project, and the instructions suggest finishing the edges with hem tape or fabric glue instead of sewing.
How much does the project cost?
The source does not give a total DIY cost. It mentions an example of mini blinds priced at just under $7, while noting that some Roman shades start at about $150 per window before installation. Those figures are not a direct cost comparison for the finished project.
Source: hunker.com
